Dimensioni delle catene: 420, 428, 520, 520, 525, 50 (530), 532, 630 e 632 catene.
Può essere utilizzato per la maggior parte dei modelli di auto domestiche..
Il corpo è progettato con una forma ottimale basata sull'analisi della resistenza ed è robusto e leggero abbastanza da soddisfare i professionisti..
I perni di taglio e i perni di calafataggio sono realizzati in acciaio speciale (materiale SK) e trattati termicamente in modo ottimale per una durata eccellente..
La struttura dei componenti è progettata tenendo conto del flusso di lavoro.
Il perno della taglierina può essere sostituito dalla parte anteriore del bullone interno, quindi non è necessario rimuovere il bullone..
I perni di taglio delle serie 40 e 50, usati frequentemente, sono comuni..
La piastra di calafataggio a pressione è uguale per tutte le dimensioni (piastra di calafataggio a pressione) e può essere utilizzata direttamente come piastra di calafataggio per un lavoro senza problemi..
Gli stessi bulloni esterni sono utilizzati per il fissaggio a pressione e il serraggio della piastra, quindi non è necessario reimpostare i bulloni interni dopo aver rimosso i perni di giunzione..
L'impugnatura e il manico sono sagomati per una maggiore facilità d'uso. Sostituzione della catena di trasmissione del motociclo.
Rimozione dei perni della catena, pressatura della piastra del giunto (o del tipo a clip) e crimpatura dei perni del giunto.
Chain size: Chains of 420, 428, 520, 525, 50 (530), 532, 630, 632.
It can be used for most of the Japanese models.
The main unit is designed with the optimum shape based on the strength analysis, and realizes the sturdiness and lightness that satisfy the professionals.
Cutter pins and caulking pins are made of special steel (SK material) and are subjected to optimum heat treatment to ensure excellent durability.
It is composed of parts considering the work flow.
・The cutter pin can be replaced from the front of the inner bolt, so there is no need to remove the bolt.
・The cutter pin of 40 series and 50 series is common.
・The receiving plate for the press-fit plate is the same for all sizes (press-fit caulking receiving plate), and can be used as a caulking receiving plate as is, so that work can be performed smoothly.
Since the same outer bolt is used to press-fit and tighten the plate, it is not necessary to set the inner bolt again after removing the joint pinch.
The grip and handle are shaped for easy application of force.Motorcycle drive chain replacement.
Removal of the chain pin, press fitting of the joint plate (clip type can be used), tightening of the joint pinch.