Abbiamo realizzato la vera vite in resina con billette di alluminio..
Lavorazione CNC controllata da computer per prodotti di alta precisione.
Il bordo del casco non è appiccicoso per la profondità e la precisione della fessura anche se installato con una moneta, ed è possibile differenziarne l'aspetto senza perdere la consistenza del casco Simpson..
Abbiamo anche reso la fenditura un più, non un meno, quindi è facile lavorare..
Ci sono sei tipi di prodotti, tra cui l'alluminio semplice e l'alluminio anodizzato..
Il processo di anodizzazione è Red Alumite / Clear / Black Alumite / Gold Alumite / Orange Alumite / Blue Alumite.
[Istruzioni per l'installazione]
Nel caso di una vite in resina vera e propria, la filettatura della vite in resina è leggermente deformata a causa della combinazione di precisione e del meccanismo di arresto libero, ma nel caso di questa vite, la sensazione è leggermente diversa perché è di metallo..
Come già detto, le filettature non deformate rendono il morso un po' più debole e c'è un leggero movimento dopo l'installazione, ma non c'è nessun problema così com'è..
Se siete preoccupati per questo, utilizzate un adesivo per viti a bassa resistenza come Loctite..
*Quando si installa il prodotto, si prega di applicarlo alla filettatura di 5-8 mm e di serrarlo.. Non aprire o chiudere lo schermo per un certo tempo dopo averlo stretto..
*Il servizio di fissaggio Loctite è attualmente chiuso.
*Fondamentalmente, si consiglia di utilizzare una moneta da un penny.. Questo perché sono compatibili con lo stesso alluminio, ma se non li avete, potete usare monete da 10 o 5 yen.. Tuttavia, si prega di notare che non è possibile utilizzare monete con bordi frastagliati..
I made this screw from billet aluminum instead of the stock plastic screw.
Computer-controlled CNC machining is used for high-precision products.
Even if you install and remove a helmet by coin, it is hard to damage the edge because of depth and accuracy of slit.
The slit is not minus, but plus, so it is easy to work.
There are 6 types of products, including plain aluminum and anodized aluminum.
Anodizing is available in red anodized / clear / black anodized / gold anodized / orange anodized / blue anodized.
[Installation instructions]
In the case of the stock plastic screw, the thread of the plastic screw is slightly deformed due to the combination of the accuracy and the free stop mechanism, but in the case of this screw, the feeling is a little different because it is metal to metal, but please use it in the same way.
As mentioned earlier, the bite is slightly weakened because the screw thread is not deformed, and it moves a little after installation, but there is no problem even if it remains as it is.
If you are concerned about this, please use a low-strength screw adhesive such as Loctite.
*Apply to the thread 5.8 mm when installing and tighten.Do not open or close the shield for a while after tightening.
*The LockTight attachment service is currently discontinued.
*We recommend using a 1-yen coin as the primary choice.This is because aluminum coins work well together. If you don't have a 1-yen coin, you can also use a 10-yen or 5-yen coin.However, please be aware that coins with ridges cannot be used.