Questo è un kit integrato senza parafango per ZRX1100/1200 -08!
Essendo integrato dal fondo del sedile alla parte posteriore, è molto chiaro e semplice..
Design del cappuccio di coda e del parafango senza parafango. E, naturalmente, l'impianto elettrico si adatta bene..
È inclusa anche la gomma per fissare la scatola dei fusibili, in modo che non si possa vedere la gomma dal retro..
La parte della batteria è dotata di un coperchio attaccabile e il coperchio dell'alloggiamento della batteria è incluso nel kit, in modo da poter essere riposto ordinatamente..
Pertanto, non utilizziamo il vano portaoggetti originale!
Il tipo "short battery box" (precedentemente noto come "tipo a braccio oscillante a rotelle") è un prodotto che aumenta la superficie inferiore del box di 33 mm dalla superficie più bassa del magazzino..
Oltre ai veicoli equipaggiati con il forcellone di Willy,
Con questa specifica è possibile utilizzare il "Press Forming Swing Arm per ZRX1200'01-'08" di Active..
Non è necessario tagliare la scatola della batteria di fabbrica se la si installa contemporaneamente..
Se al momento state tagliando la scatola della batteria originale o state pensando di tagliare la scatola della batteria originale, vi preghiamo di contattarci,
Perché non prendi in considerazione l'installazione?
This is the integrated fender eliminator kit for ZRX1100 / 1200 -'08!
Because it is a single unit from under the seat to the rear, it is very clean.
Designed to minimize the gap between the tail cowl and fender eliminator.Of course, the electrical system also fits nicely.
The fuse-box fixing rubber is also changed to the attached one, so you can't see the rubber from the back.
The battery case cover is included in the kit, so it can be stored neatly.
Therefore, the original accessory case will not be used!
The "Short Battery Box" specification (formerly known as the "wheelie swingarm" specification) is a product where the bottom of the battery box is 33mm higher than the bottom of the stock battery box.
In addition to vehicles with wheelie swingarms,
Active's "Press-Formed Swingarm for ZRX1200 '01-'08" can also be installed with this specification.
You don't need to cut the stock battery box if you install it at the same time.
If you are currently cutting the stock battery box, or thinking of cutting the stock battery box,
Why don't you consider installing it?