Una serratura a forma di U molto forte, con un corpo in acciaio resistente e un robusto cilindro per chiavi..
Può essere fissato a un pneumatico o a una ruota..
La barra di bloccaggio è progettata con un grande diametro di 16 mm per una chiusura più resistente..
Ampia larghezza interna della barra di bloccaggio per l'utilizzo con pneumatici più grandi..
Naturalmente, può essere utilizzato sia per le biciclette che per le motociclette..
Quando rileva una vibrazione, suona un forte allarme perforante da 120dB per evitare che la vostra auto venga rubata..
Lo speciale trattamento superficiale del corpo del blocco del disco e la sua impermeabilizzazione gli conferiscono una finitura lussuosa..
La batteria di allarme è una batteria al litio CR2. (Può essere utilizzato per circa 10 mesi).
Inoltre, l'allarme ha una funzione on/off..
------ Come operare ------
[Come accendere/spegnere]
Se si gira la chiave (circa 270 gradi) per bloccare il dispositivo e poi lo si gira indietro, un singolo "beep" suonerà alcuni secondi dopo per indicare che l'allarme di sicurezza è in modalità ON..
Ripetendo la stessa operazione rapidamente dopo l'accensione, si sentirà un breve "beep" due volte.. A questo punto, l'allarme di sicurezza è disattivato..
*Controllare il suono di funzionamento prima di chiudere la chiave..
[Come installare la batteria]
*Oltre agli utensili in dotazione è necessario un cacciavite a croce.. Si prega di essere preparati..
1. Rilasciare la barra di blocco..
2. Inserire un cacciavite a croce nel foro della barra di bloccaggio e rimuovere la vite..
*Togliere la vite dal lato senza il cilindro della chiave..
3. Rimuovere il coperchio in silicone, il coperchio e l'unità di allarme, in quest'ordine.
4. Rimuovere le due viti dall'unità di allarme con l'utensile in dotazione..
5. Rimuovere il coperchio della batteria e il coperchio impermeabile e installare la batteria..
6. Assemblare in ordine inverso e il gioco è fatto!.
*Quando si installa la batteria, fare attenzione a non dimenticare il coperchio impermeabile..
*Quando si installa l'unità di allarme, fare attenzione ad inserire l'unità di allarme nella tacca..
This is a very strong U-shaped lock with a strong steel body and a strong key barrel.
It can be tightly fixed to tires and wheels.
The diameter of the lock bar is 16mm, which makes the lock stronger.
Also, the internal width of the lock bar is large enough to accommodate larger tires.
Of course, it can be used not only for motorcycles but also for bicycles.
When vibration is detected, a piercing alarm sounding at a loud volume of 120dB is emitted, and this product is effective in preventing theft of your vehicle.
In addition to waterproof specifications, the body of the disc lock is finished with a special surface treatment to give it a high-class look.
The battery for alarm is CR2 lithium battery.(It can be used for approx. 10 months)
In addition, the alarm has an [ON / OFF] function.
--- Operation ---
[How to switch ON / OFF]
When the key is turned (approx. 270°) to lock and then turned back, a short "beep" sound will be heard once, followed a few seconds later by a notification sound indicating that the security alarm has entered the ON mode.
By repeating the same operation quickly again after turning on the device, you will hear a short "beep" sound twice.In this case, the security alarm is turned off.
*When you lock the key, please confirm the sound of operation and lock the door.
[How to install the battery]
*A Phillips screwdriver is required in addition to the supplied tools.Please be prepared.
1. Remove the lock bar.
2. Insert a Phillips screwdriver into the hole of the lock bar and remove the screw.
*Remove the screw from the side without the key cylinder.
3. Remove the silicone cover, cover, and alarm unit in that order.
4. Remove the two screws from the alarm unit with the supplied tool.
5. Remove the battery cover and waterproof cover and install the battery.
6. Assemble in reverse order to complete.
*Please be careful not to forget to attach the waterproof cover when you install the battery.
*When installing the alarm unit, be careful to insert it into the notch on the alarm unit.