Si tratta di un set completo che comprende un portapacchi posteriore, scatola posteriore, base di montaggio e viti per Estrella..
Nel set è incluso anche un rivestimento interno della scatola posteriore in edizione limitata!.
Il portapacchi posteriore è ora disponibile sia per le estrellas iniettate a carboni attivi che per le estrellas iniettate a carboni attivi!
L'Estrella è stata introdotta nel 1992 ed è stata migliorata per rispettare le normative sulle emissioni, ed è ancora oggi nel nostro catalogo.. Il design di base della carrozzeria non è cambiato, ma i dettagli sono stati cambiati a seconda dell'anno del modello, quindi sarà necessario fare attenzione quando si acquistano parti aftermarket..
Il portapacchi posteriore è uno di questi.. Il portapacchi posteriore ad iniezione di fabbrica di Kawasaki non può essere utilizzato con un carburatore..
Ma quando abbiamo avuto a disposizione sia la vecchia che la nuova carrozzeria Estrella, siamo stati in grado di progettare un portapacchi posteriore che potesse essere utilizzato per entrambi..
I dettagli sono diversi tra il tipo di cabina di Estrella e i veicoli a iniezione, ma abbiamo progettato questo prodotto in modo che non interferisca con l'apertura e la chiusura del sedile.. Inoltre, Estrella è stata progettata con sottili barre tonde e verniciata in nero per non dare nell'occhio a seconda dell'anno e della versione del modello..
Le gambe sono lunghe 10 mm e la tavola superiore è realizzata con sottili barre metalliche da 9 mm, ma il design è rinforzato con una forte resistenza alle vibrazioni, in modo da poter resistere alle vibrazioni uniche dei singoli cilindri..
Anche il design è importante! Pannello superiore progettato per seguire le linee del sedile
Abbiamo fatto in modo che ci sia un ampio spazio libero tra il sedile e il portapacchi posteriore, ma ci siamo anche assicurati di non allargarlo semplicemente e di schivarlo lungo le linee del sedile in modo che sia bello come quando il portapacchi posteriore è montato..
È una grande partita per il portapacchi posteriore WorldWalk!
Non è solo progettato per trasportare un carico, ma anche per montare una scatola posteriore, quindi le basi per uso generale per le scatole posteriori standard possono essere montate senza problemi.. E, naturalmente, funziona alla grande con il box posteriore Worldwalk!.
La capacità di carico è di 5 kg, quindi può essere installato un box posteriore di classe 40 litri..
Per non rovinare l'immagine dell'estrair, abbiamo adottato come materiale una barra rotonda e sottile, creando un design che è robusto ma che si adatta al corpo snello dell'auto..
This is a full set of Estrella rear carrier, rear box, base and screws for installation.
In addition, the set comes with a limited edition rear box inner.
World Wolk has created a rear carrier that can be installed on both carbureted and injected ESTRELLA
Introduced in 1992, ESTRELLA is one of KAWASAKI's most popular classic bikes.The basic design of the vehicle has not changed, but the details have been changed depending on the year, so be careful when purchasing aftermarket parts.
The rear rack is one of them.KAWASAKI stock rear carriers for injected vehicles cannot be fitted to carbureted models.
However, with both the new and old ESTRELLA chassis, World Walk was able to design a rear rack that would fit both.
Although the details of ESTRELLA's carbureted and injected models are different, World Walk has designed this product so that it will not interfere with the opening and closing of the seat when installed on either model.Depending on the year and version of the ESTRELLA, there is a chrome based design or a black based design, but World Walk designed the ESTRELLA with thin round bars and finished it with black paint.
The legs are made of 10mm and the top plate is made of 9mm thin metal rods, but the design is reinforced to withstand the vibrations of a single cylinder.
Design is also important!Designed so that the top panel part follows the line of the seat
In addition to securing the clearance between the seat and the rear carrier, World Walk has tried to keep the form of the rear carrier by following the line of the seat rather than simply widening it.
Compatible with World Walk rear carriers
It is designed not only to carry luggage but also to fit a rear box, so a universal base for a rear box can be installed without any problem.Of course, it also goes great with the World Walk rear box.
The load capacity is 5kg, so it is possible to install a 40L rear box.
To keep the image of ESTRELLA intact, World Walk used a slender round bar as the material to create a design that is rugged yet fits the slim body.