spostamento (di un veicolo) : 86cc
Ritorno frizione centrifuga a 4 velocità
(Schema di spostamento N-1-2-3-4)
[Accessori (per scimmie)]
Calciare il pedale
Pedale del cambio
Carburatore (16mm)
collettore
・CDI
regolatore
Relè indicatore di direzione
Bobina di accensione
Imbracatura principale
*E' un sistema di ritorno, quindi non va in folle dalla quarta marcia.
*Nel caso di veicoli a 12v, è possibile utilizzare il cablaggio standard, ma è necessario sostituire l'accoppiatore del motore al terminale Giboshiki.
*Se si desidera installarlo in un veicolo a 6v, è molto conveniente utilizzare [ca885]12v cablaggio di conversione del motore. (Non è necessario cambiare le imbracature perché si può utilizzare l'imbracatura 6v originale).
*Nel caso di veicoli a 6v, è necessario sostituire la batteria, le valvole e le altre parti elettriche per 12v.
*Il collettore allegato è per le scimmie. Alcuni veicoli (come telai e cubi) possono richiedere modifiche.
*Indipendentemente dalla scelta dell'imbracatura, il set è composto da parti di scimmia.
[Specification]
・Displacement: 86cc
・Centrifugal clutch Return 4-speed (shift pattern N-1-2-3-4)
[Components (for MONKEY)]
・Kick Pedal
・Shift pedal
・Carburetor (Φ16)
・Manifold
・CDI
・Regulators
・Blinker relay
・Ignition coil
・Main harness (Please choose one from the options)
*Please check the engine model carefully before purchasing.
*It is a return type, so it will not go into neutral from 4th gear.
*Regardless of the harness selection, the set contents are parts for Monkey.
*The supplied manifold is for Monkey.Some vehicles (CHALY, CUB, etc.) may require modification and may not fit.
*For 12v vehicles, the stock harness can be used, but the coupler for the engine connection must be replaced with a crimp terminal.
*When installing on a 6V Vehicle, the [ca885] 12V engine replacement harness is very convenient.(The 6v stock harness can be used, so there is no need to change the harness)
*When installing on a 6V bike, it is necessary to convert the electrical system such as battery and valve to 12V.
*If the breather pipe of the engine body is installed between frames, the pressure inside the crankcase will increase and oil will leak out, which is very dangerous.Check the condition of the breather pipe after engine installation before starting the engine.
*The sprocket attached to the engine is for checking the engine start.Sprockets are not replaced.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.