Un set completo che comprende il piedistallo e le viti necessarie per l'installazione.
Nel set è incluso anche un rivestimento interno della scatola posteriore in edizione limitata!.
Nuovo portapacchi posteriore per tutti e quattro i modelli..
Yamaha YZF-R25 e YZF-R3, MT-25 e MT-03 condividono lo stesso motore e lo stesso telaio.. Abbiamo sviluppato un portapacchi posteriore che può essere montato su quattro diversi modelli regolando la configurazione del veicolo..
La YZF-R25, con la sua cappottatura e il suo design supersportivo, e la MT-25, con la sua immagine da street-fighter. Entrambe le biciclette hanno un'immagine sottile e nitida, sono leggere e performanti..
Il portapacchi posteriore è una parte pratica, ma lo abbiamo progettato per essere il più nitido possibile senza distruggerne l'immagine..
Progettato per essere il più affilato possibile mantenendo lo spazio per il passeggero.
Inizialmente, ho messo il telaio del portapacchi posteriore fino al bordo stesso del sedile, in modo da non distruggere l'immagine nitida e serrata.. Il design è esattamente quello che volevo, ma quando ho provato a far sedere il passeggero, è diventato angusto..
Pertanto, l'abbiamo progettato leggermente più ampio del campione iniziale, in modo che ci sia più spazio per un uomo di grandi dimensioni per sedersi sul sedile del passeggero.. Più stretti senza sacrificare il comfort dei passeggeri.
La capacità di carico massima è di 5 kg. La stiamo rafforzando in molti luoghi..
Al giorno d'oggi, sta diventando sempre più comune installare un portapacchi posteriore e un box posteriore come set, anche su veicoli che sono progettati per assomigliare alle supersportive.. Poiché alcune delle scatole posteriori più grandi pesano circa 5 kg, abbiamo rinforzato tutte le parti per mantenere la massima capacità di carico fino a 5 kg..
Abbiamo messo delle piastre di rinforzo nel telaio dove è montato il portapacchi posteriore, e abbiamo anche messo dei rinforzi nelle gambe del corpo..
La forma dei glutei è stata progettata pensando alla praticità e al design.
Quando la scatola posteriore è installata, il coperchio può chiudersi da solo se è orizzontale o verticale quando viene aperto.. Pertanto, abbiamo fatto in modo che il corpo posteriore del portapacchi avesse una forma inclinata all'indietro.. L'angolo è progettato per corrispondere all'angolo del cappuccio di coda in modo che ci sia un senso di unità..
(Per MT-25/03, rimuovere il maniglione e installarlo.. YZF-R25/3 è stato progettato per ridurre al minimo la necessità di praticare fori nel cofano di coda.. È incluso anche un modello per una facile identificazione della posizione dei fori..
Full set with base and screws required for installation.
In addition, the set comes with a limited edition rear box inner.
■The rear carrier for the same four models is available.
Yamaha's YZF-R25 and YZF-R3, MT-25 and MT-03 each share the same engine and frame.Although the vehicle configuration is slightly different, World Walk has developed a rear carrier that can be adjusted to fit four different models.
The YZF-R25 has a cowling and design reminiscent of supersports, while the MT-25 follows the image of a street-fighter.Both bikes have a slim, sharp image and are lightweight with powerful performance.
The rear rack is a practical part, but World Walk designed it not to destroy the sharp image as much as possible.
■Designed to be as sharp as possible while retaining space for the passenger.
In order to keep the sharp and tight image of the bike, the frame of the rear rack was brought up to the very edge of the seat.The design of the vehicle is as World Walk wanted, but it is too tight for the passenger to sit on.
The passenger seat was designed to be slightly wider than the first sample to allow room for a larger man to sit in the passenger seat.It is a tight fit without sacrificing passenger comfort.
■Maximum loading capacity is 5kg.World Walk is reinforcing every part of it.
Recently, it has become common to install a rear carrier and a rear box as a set, even for super sports inspired vehicles.Some of the larger rear boxes weigh about 5kg, so I reinforced each part of the box and set the maximum load capacity to 5kg.
The reinforcement plate is placed on the frame where the rear carrier is installed, and also on the legs of the main body.
■The shape of the buttocks is designed for practicality and design.
When the rear box is installed, the lid may close by itself if it is horizontal or raised forward when the lid is opened.This is why the rear rack is designed to be raised backwards.The angle of the tail cowl is the same as the angle of the tail cowl, so the design has a sense of unity.
To install, remove the grab bar from MT-25 / 03.YZF-R25 / 3 requires drilling of some parts of the tail cowl, but World Walk has designed the cowl so that drilling of the cowl is minimized.A paper pattern is also included to help you know where to drill the holes.