[Materiale]
· Manubrio: Acciaio
· Flessibile del freno: acciaio inossidabile
[Contenuto del prodotto]
· Manubrio
· ThrottleW Black OuterCable
· Clutch Black OuterCable
·Tubo del freno (Realizzato in acciaio inossidabile pieno)
[Dimensione maniglia]
· Altezza totale: 95 mm
・ Larghezza totale: 820mm
・ Larghezza effettiva della parte di montaggio del supporto: 150mm
· Taglia indietro: 230mm
・ Angolo interno: 37 gradi
-Angolo antistress: 54 gradi
* Il set di maniglie è un set di cavi e tubi flessibili che devono essere sostituiti con la maniglia.
* Cappuccio laterale per manico in acciaio Il diametro interno di 18 mm è richiesto separatamente.
* Richiede la lavorazione del foro dell'interruttore.
* [Richiesto separatamente]
È necessario quando si estende l'imbracatura.
Imbracatura di estensione 300L HD1068
* È necessario sostituire l'acceleratore, la frizione e il freno. (NORMALE impossibile)
* Il cablaggio può essere installato normalmente e deve essere cambiato.
[Material]
・Handlebar: Steel
・Brake hose: Stainless steel
[Set components]
・Handlebar
・Throttle W Black Outer Cable
・Clutch Black Outer Cable
・Brake Hose (Full Stainless Steel)
[handlebar size]
・Total height: 95mm
・Total width: 820mm
・Effective width of the holder mounting part: 150mm
・Pullback size: 230mm
・Insertion angle: 37 degrees
・Forward leaning angle: 54 degrees
*Handlebar set is a set of handles and cables / hoses that need to be replaced.Please note the parts required separately.
*Side caps for steel handlebar inner diameter 18mm are required separately.
*Machining of the switch hole is required.
*[Parts required separately]
This is required when extending the harness.
Extension harness 300L HD1068
*Throttle, clutch and brake need to be replaced. (Stock not available)
*The harness can be installed with the stock harness.Routing needs to be replaced.