Misty 64 piegatura a mano per la Z400FX con tutti i dettagli fini e la coccolatura.
Ho allungato il tubo di scarico il più possibile per ottenere più coppia..
La bellezza della curva dell'eclissi!
Grande maestria artigianale!
Punti di coordinamento
Il soggiorno di sospensione della marmitta è un soggiorno singolo, non doppio, a differenza di quello dello Zephyr.
È stato progettato per adattarsi alla piastra di gradino del modello finale Z400FX E4..
La serie FX può essere installata su tutti i modelli..
E naturalmente, possiamo gestire tutte le auto reimportate..
Z500, Z550, 400J... Tutto OK!
E anche di più!
La posizione della sospensione della marmitta rimane! e forma! Leggermente in diagonale dal davanti!.
Se la sospensione rimane troppo indietro, la marmitta sembrerà troppo corta e brutta..
La lunghezza complessiva è una questione di equilibrio..
Ma la posizione dello strallo è determinata dal telaio.
Così ho messo lo strallo davanti al tubo di scappamento per farlo sembrare fresco..
La posizione del tubo che esce lateralmente dalla sezione di montaggio!
È una cosa importante e ingegnosa..
Questo squisito spazio ed equilibrio!
Sta venendo fuori ben bilanciato!
Anche l'allontanamento dal corpo è importante..
Montare il più strettamente possibile lungo il corpo dell'auto..
E poi guardate l'equilibrio di tutto e regolate le distanze..
La sensazione di essere paralleli al braccio oscillante è bella e fresca..
Piastra a gradini tandem angolata per un migliore equilibrio..
Si tratta di un tubo che viene sollevato dal centro del gruppo, ma è stato realizzato con un po' di spazio per adattarsi al forcellone in alluminio di Misty..
64 marmitte piegate a mano che sono state accuratamente lavorate!
Devi farlo!
Una torta a 64 pasticcini che è intelligente e ha più potenza!
FX riders!
Cosa ne pensi?
Silenziatore S installato in fabbrica (il silenziatore è rimovibile).
MISTY 64 hand bent for Z400FX with a lot of detail.
We made the exhaust pipe as long as possible to get more torque.
The beauty of the exhaust pipe bends!
Great craftsmanship!
■Points of emphasis
The hanging brackets of the exhaust is different from the Zephyr, it is not a double bracket but a single bracket.
This kit is designed to fit to the step plate of the last model Z400FX E4.
This allows the FX series to be mounted on all types.
Of course, we also deal with all reimported bikes.
Z500, Z550, 400J... All OK!
And more!
The position and shape of the exhaust suspension bracket comes out from the front at a slight angle.
This is because if the position of the suspension bracket is too far back, the exhaust will look short and ugly.
The overall length is determined by the balance.
But the position of the bracket is determined by the frame.
So, we put the bracket as far forward as possible to make the tail pipe look cool.
The position of the pipe coming out to the side from the merge collector is the key!
This perfect clearance and balance!
It's coming out beautifully balanced!
Clearance to the body of the bike is also important.
We fit it as snugly as possible along the body and adjust the clearance to balance everything.
The parallelism with the swingarm is cool and clean.
The angle should be aligned with the angle of the pillion step plate for better balance.
This pipe comes up from the merge collector, but it is made with a little extra width to be compatible with aluminum swingarms other than MISTY.
64 hand-bent exhaust that has been painstakingly crafted!
Come on!!!!
64 for more power!
For FX riders!
What do you think?!!
Factory fitted S silencer (Silencer is removable).