La morbidezza del software lo rende molto efficace sulle superfici curve!
Dischi da macinazione da 100 mm per metallo per smerigliatrici a disco.
Utilizzato principalmente per la rimozione dei cordoni di saldatura, la sbavatura, la rimozione della ruggine e la lucidatura di superfici piane.
[Caratteristica 1: morbido e flessibile]
La caratteristica di questa macchina è che la base del tessuto è molto piccola e piegata, quindi la pressione può essere regolata sull'oggetto ed è particolarmente efficace per le superfici curve..
Suggerimento: l'immagine mostra una bava sul pezzo..
Ne risulta una dispersione della pressione, che rende facile l'adattamento all'oggetto e mostra la sua forza sulle superfici curve..
Per gli oggetti a forma libera, questo "software" è l'unica scelta..
[Caratteristica 2 - Lisciatura liscia]
Ciò è dovuto al fatto che le parti sporgenti del software vengono facilmente rasate grazie alla sua caratteristica "flessione"..
È adatto per lisciare e lisciare.
*Il bello di "soft" è che il modo in cui si applica la pressione può cambiare il modo in cui lo si fa..
[Caratteristica 3 - Compatibilità con le smerigliatrici a bassa velocità]
È possibile utilizzare anche una smerigliatrice normale, ma è anche molto compatibile con una smerigliatrice a bassa velocità..
[Caratteristica 4 - La ruota in zirconio]
La pietra di macinazione del tessuto è lo zirconio..
Duro e adatto al taglio pesante e resistente contro il taglio dell'acciaio inossidabile..
[Velocità della smerigliatrice a disco]
Quando viene utilizzato a bassa velocità (basso numero di giri), la forza centrifuga diventa piccola, quindi il contatto tra il disco di rettifica e il pezzo da lavorare diventa morbido..
Ciò rende facile l'adattamento della forma del panno abrasivo al pezzo in lavorazione, soprattutto nel caso di "morbido" e "aria", dove l'influenza del fissaggio del substrato è piccola, e rende facile eseguire la rettifica e il taglio in accordo con la forma della superficie curva..
Inoltre, riduce l'usura, i danni, i morsi e gli intoppi causati da un panno abrasivo volante..
*È facile da usare in modo uniforme durante la finitura, il che porta a meno graffi..
D'altra parte, il taglio pesante comporta una velocità di taglio più lenta a causa di una diminuzione della quantità di lavoro dovuta alla diminuzione del numero di giri..
Per il "Flat" e soprattutto per il "Cut", si consiglia l'uso di un tipo rotativo generale ad alta velocità..
[Smerigliatrice a bassa velocità]
*La scelta più comune è una smerigliatrice a disco a bassa velocità, ad alta coppia o un regolatore di velocità con funzione di cambio marcia..
[Compatibilità con basse e alte velocità]
Bassa velocità <ー>alta velocità
Morbido/aria/piatto/piatto/taglio
40/120/320
Its softness makes it very effective for curved surfaces!
Abrasive discs for metal for 100mm disc grinders.
Mainly used for weld bead removal, deburring, rust removal and flat curved surface polishing.
[Feature 1 - Flexibility applied by unique softness]
The feature is that the backing of the cloth is very small and bends greatly, so the pressure can be adjusted to the object, and it is especially effective for curved surfaces.
Supplemental: When it touches the object to be polished, it makes a burr as shown in the image.
This causes the pressure to disperse, making it easy to adapt to the object, and it is highly effective on curved surfaces.
This "software" is the best choice for modeling free-form surfaces.
[Feature 2 - Smoothing]
This is because the protruding part is easily shaved off by the soft's characteristic "bent".
It is suitable for making it smooth.
*It is also the good point of "Soft" that it can be changed by the way of pressurization.
[Feature 3 - Compatibility with low-speed grinders]
It can be used with a standard grinder, but it also works well with a low speed grinder.
[Feature 4 - Grindstone Zirconia]
The grinding wheel of the polishing cloth is zirconia.
It is hard and suitable for heavy cutting, and is a strong material for cutting stainless steel.
[About the speed of the disc grinder]
When used at low speed (low rotation speed), the centrifugal force is reduced and the contact between the grinding disc and the workpiece becomes softer.
This makes the shape of the abrasive cloth more familiar to the workpiece, especially in the "soft" and "air" types where the fixing influence of the base is small, and makes it easier to perform abrasive cutting along the shape of curved surfaces.
In addition, the wear and tear, damage, biting and snagging caused by scattering of abrasive cloth can be reduced.
*It is also easy to operate evenly when finishing, leading to a reduction in scratches.
On the other hand, in heavy-duty cutting, the cutting speed becomes slower due to weaker contact and lower workload caused by reduced rotation speed.
For "Flat" and especially "Cut", recommending the use of a general high-speed rotation type.
[slow grinder]
*It is common to use a disc grinder with variable speed function, low speed and high torque type and speed controller.
[compatibility with low and high speeds]
Low speed <--------> High speed
Soft / Air / Flat / Cut
40 / 120 / 320