Come conciliare i temi contrastanti dell'"efficienza di raffreddamento" e delle "prestazioni di protezione"?.
Ciottoli e detriti arrotolati dai pneumatici anteriori e insetti che volano ai semafori... etc
Queste danneggeranno il nucleo del radiatore, che è fatto di alette di alluminio..
Se le alette vengono schiacciate, l'effetto di raffreddamento si perde e in alcuni casi la linea dell'acqua può essere danneggiata, causando una perdita di refrigerante...
Le protezioni del nucleo del radiatore di Etching Factory sono state testate più volte durante le 8 ore di gara di resistenza su strada in estate, che è il momento più difficile per i radiatori..
Il posizionamento del modello di maglia, lo spessore delle linee di maglia e il rapporto di apertura sono confezionati con il feedback della gara.
La parte centrale è fine e i lati hanno una maglia a maglia esagonale grossolana.
Questo assicura che i sassolini e i detriti filati dal pneumatico anteriore siano protetti da una maglia fine al centro che corrisponde alla larghezza del pneumatico.. La maglia grossolana su entrambi i lati è progettata con un rapporto di apertura che bilancia i temi contrastanti di "efficienza di raffreddamento" e "protezione"..
C'è una ragione per la scelta del materiale.
L'acciaio inossidabile (SUS304 0,5t) viene utilizzato per ottenere una larghezza ideale della linea di maglia senza ridurre la resistenza, che può essere ottenuta solo abbassando lo spessore delle piastre in alluminio o titanio (riduzione della resistenza)..
Tenendo conto di questi fattori, il Core Guard non è solo un oggetto per mantenere le prestazioni, ma ha anche un effetto di dress-up per mostrare la sua bellezza..
Proteggere e incantare.
Siamo orgogliosi di consigliarlo per la vostra macchina..
"The question is how to reconcile the conflicting themes of "cooling efficiency" and "protection performance".
Pebbles and garbage rolled up from the front tire, insects flying at the light..etc
These will damage the radiator core which is made up of aluminium fins.
When the fins are crushed, the cooling effect is lost, and in some cases, the water line may be damaged, causing a coolant leak...
The radiator core guard of the etching factory has been tested many times mainly in the 8 hours endurance road race in the midsummer which is the most severe for the radiator.
The placement of the mesh pattern, the thickness of the mesh lines, and the aperture ratio are all based on feedback from the racing scene.
・The center part is fine and both sides are coarse hexagon mesh pattern.
This ensures that pebbles and debris spun off from the front tire are guarded by a fine mesh in the center that matches the width of the tire.The coarse meshes on both sides are designed with an aperture ratio that takes into account the conflicting themes of cooling efficiency and protection.
・There is also a reason for the choice of material.
In the case of aluminum or titanium, the mesh line width can only be achieved by lowering the plate thickness (lowering the strength), but by using stainless steel (SUS304 0.5t), the ideal line width can be achieved without lowering the strength.
Based on the above, the core guard is not only an item to maintain the performance of the vehicle, but also has a dress-up effect to show off the beauty of the vehicle in a casual manner.
To protect, to charm.
It is recommended with confidence for your valuable machine.