Si tratta di un doppio sedile spesso che può essere montato su qualsiasi carburatore o modello FI con il cappuccio del sedile di fabbrica..
La larghezza dell'area di seduta è più ampia rispetto al sedile di fabbrica per una migliore qualità di guida, e la parte in cui le gambe sono abbassate è più stretta e meno spigolosa per fornire la stessa base del sedile di fabbrica..
Quando la posizione di seduta è elevata, le ginocchia diventano meno piegate e il carico dei fianchi viene trasferito alla postura del passo man mano che il cavaliere si avvicina alla postura in piedi..
Aumentando il carico del gradino si riduce il carico sulle natiche e i gradini sono più facili da manovrare..
Un posto che rende i lunghi tour più confortevoli e piacevoli..
Utilizzando una spugna da iniezione cotta nello stampo.
Ha una buona ammortizzazione e non si deteriora nel tempo, quindi può essere utilizzato a lungo..
Caratteristiche.
L'intera pelle è in tinta unita nera con bordino bianco nella cucitura centrale.
Tipo A con una linea di tubazione che si estende fino al lato del serbatoio..
Installazione
È necessario riposizionare l'ammortizzatore del sedile dal sedile di fabbrica da installare nel veicolo..
Installare il supporto di installazione sul lato del serbatoio della benzina e fissare il lato posteriore con i bulloni del sedile di fabbrica e il sedile di fabbrica..
Può essere utilizzato con il parafango posteriore K&H e il parafango posteriore K&H..
In caso di utilizzo in combinazione con un supporto Wise Gear, la ferramenta di montaggio deve essere invertita..
This is a thick double seat that can fit the stock seat cowl on all years of carburetor / FI models.
The width of the seat surface is wider than the stock seat to improve the ride comfort, and the part where you put your feet down is narrower and less angular to achieve the same footing as the stock seat.
The higher the seating position, the looser the bend of the knees becomes, and the riding posture becomes closer to the standing posture, and the load of the buttocks is transferred to the step.
By increasing the step load, the load on the buttocks is reduced and it is easier to control the vehicle with the step.
It is a seat that makes long touring more comfortable and enjoyable.
The injection sponge is fired in the mold.
The cushioning is good and does not deteriorate over time, so you can use it for a long time.
■Features
The entire leather is plain black, with white piping at the center seam.
This is the A type where the piping line extends to the tank side.
■Mounting
It is necessary to transfer the seat damper from the stock seat for installation to the vehicle.
Install the attached bracket on the gasoline tank side, and fix the rear side with the stock seat bolts just like the stock seat.
It can be used with stock grab rails or K & H rear fenders.
When using with Y's gear carrier, it is necessary to attach the mounting bracket upside down.