Colore : Alluminio anodizzato nero
Raggio massimo della ruota posteriore
+6cm =225mm
+12cm=250mm
+16cm=270mm
+20cm=305mm
Posizione di installazione della sospensione posteriore
+6cm=245mm
+12cm/+16cm/+20cm=310mm
Accessori : Albero lungo M12 L=290mm
Azienda di produzione : KEPSPEED
Paese d'origine : Cina
*M12 Long Axle Shaft L=290mm è incluso. I semiassi di lunghezza standard non possono essere utilizzati.
*Regolatore di catena e gancio di supporto in colore titanio.
[Installazione]
*Questo forcellone è progettato per essere utilizzato senza regolazione quando si utilizza il kit completo.
*Si prega di notare che la combinazione con i prodotti di altre aziende non è stata testata.
*Per i lavori di montaggio è necessaria una persona con esperienza nella manutenzione delle moto.
*Il numero di telai della catena di trasmissione varia a seconda delle condizioni del veicolo del cliente e dei pignoni anteriori e posteriori, quindi GM-MOTO non fornisce informazioni in merito.
*Anche se la sospensione posteriore è a fondo pieno, assicurarsi che non ci siano anomalie nei punti di contatto.
*Se lo spazio tra il telaio e il forcellone è superiore a 0,5 mm su ogni lato, si dovrebbe ridurre lo spazio utilizzando delle rondelle.
*Se si stringe l'albero del perno con una grande distanza, nel peggiore dei casi il forcellone può essere danneggiato.
*C'è un caso in cui c'è un leggero cambiamento di specifiche nella parte dettagliata per ogni prodotto. C'è un punto che differisce leggermente dall'immagine d'introduzione, ma darò la priorità alla cosa reale, quindi per favore capite, per favore.
*Questa è una grande opportunità per lavorare in un negozio specializzato nella manutenzione delle moto.
*Dopo aver iniziato a far funzionare il motore, fate attenzione alla cosiddetta "allentamento iniziale" del motore, e ispezionatelo frequentemente per evitare problemi imprevisti.
*L'immagine può contenere altri prodotti.
*Si prega di notare che le specifiche del prodotto possono essere soggette a modifiche a causa della convenienza del produttore. Per favore, cerca di capire.
■Color: Black Anodized Aluminum
■Maximum rear wheel radius
+6cm = 225mm
+12cm = 250mm
+16cm = 270mm
+20cm = 305mm
■Rear suspension installation position
+6cm = 245mm
+12cm / +16cm / +20cm = 310mm
■Components: M12 Long Axle Shaft L=290mm
■Manufacturing company: KEPSPEED
■Country of origin: China
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*M12 Long Axle Shaft L = 290mm is included.Stock length axle shafts cannot be used.
*Chain adjuster and stand hook in titanium color.
[About the installation]
*This swingarm is designed to be used without adjustment when the complete kit is used.
※GM-MOTO has not verified the consistency of the combination with other companies' products.
*Please make sure that the person with experience in motorcycle maintenance performs the assembly work.
*The number of tentioners of the drive chain varies depending on the condition of the customer's vehicle and the front and rear sprockets, so GM-MOTO does not provide information on this.
*Even if the rear suspension is at full bottom, make sure to check for any abnormal contact points before riding.
*If the gap between the frame and the swingarm is more than 0.5mm on each side, please use washers to reduce the gap.
*If the pivot shaft is tightened with a large gap, the swingarm will be subjected to a high load and may be damaged in the worst case.
※There may be some minor specification changes for each product.There may be some points that differ slightly from the introduction image.
*Please have assembly work done in a specialist shop regarding motorcycle maintenance.
※After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*The image may include other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.