296.07 CHF (54,791 JPY)
Informazioni di consegna
No Information acquired.
FITMENT
-
XB12X ULYSSES
-
S3T THUNDERBOLT
-
XB12S LIGHTNING
-
XB12SCG LIGHTNING
Vedi tutti
BUELL
Product detail
**Se il manuale di istruzioni è incluso, è in inglese.
*Si prega di notare che la consegna potrebbe essere ritardata a causa dell'importazione. Si prega di notare che potrebbe esserci un ritardo nella consegna a causa di merci importate.
*Si prega di notare che le specifiche del prodotto possono essere soggette a modifiche a causa della convenienza del produttore. Per favore, cerca di capire..
* L'immagine è solo per riferimento. L'immagine visualizzata può essere diversa dal prodotto reale.
Programmable through software in a simple and fast way!
Through the appropriate wiring the JETPRIME is installed downstream of the standard control unit and before the throttle body.
In this way the signals sent by the standard control unit they can be modified according to your needs.
The JETPRIME makes it possible to change the fuel ratio going to change the time interval in which the injectors remain open during the aspiration phase.
Often standard motorcycles are limited due to compliance with anti-pollution regulations;performance can therefore be greatly improved and you can do it with this unit!
The JETPRIME control unit becomes essential if combined with a exhaust and a racing filter,as it requires an ad hoc carburetion.
The control unit can be programmed via PC thanks to the USB connection in a simple and intuitive way:just create a 2D carburetion chart.
With the supplied software,you can create your map by acting only on the arrow keys on the keyboard!
The control unit is connected to the injectors,to the IAT sensor and to the 12v derived from the key.
The connection to the IAT sensor allows the advance value to be changed without risking damage to the engine!
Attenzione
* If there may be an instruction manual included, it will be written in Japanese.