48.07 CHF
(8,036 JPY)
43.64~ CHF
(7,296 JPY)
(9% OFF)
5 (3 Recensioni)
Excellent
Daytona SidemirrorsExcellent quality, fair enough for it’s price, not comparable from fake, and low quality ones sold from china, the only downside is, I need to get a new bar end that would fit to this sidemirrors, so take note whoever owns a z900rs, you really have to buy smaller bar end weights
Reviews For DAYTONA HIGHSIDER Specchietto Bar End MONTANA From Other Webike User
Excellent
Large satisfiedI installed it in a water-cooled Bonneville 100
I used the Adapter that came with it
The work itself is simple and can be installed in about 10 minutes
It's cooler and has better visibilityView Detail
Very Good
CoolThis is my first Bar end mirror
If the diameter of the Handlebar is OK, installation is not difficult, and it takes only 10-15 minutes I think it's over
When installed on the STREETTWIN
No need for an adapter, just the resin collar (Spacer) that comes with it You can However, you need to buy Bar End separately because the OEM Bar End will not be available
I bought it Fanatic Aluminum Bar End Short Type Flat It is And, to fill the Bolt hole that the OEM Mirror was attached to, the M10 POSH Faith Mirror Hole Cover Cap (Opposite Thread) (Screw) Buy Quantity instead of Normal Thread Screw:2pc. Set and rdquo; Opposite Thread Screw&rdquo So don't make a mistake
When you add Mirror and Bar End that you bought this time to STREETTWIN, you can see the edge of Grip There will be a gap between the Bar End and the Bar End So, because the Screw which has fixed Bar End is seen from that part, it will be wet in the rain I'm a little worried about it rusting I'm thinking of looking for a Pipe to do something about it
[Others]
When installing, if the Bolt is not tightened quite strongly (more than I imagined), Mirror will turn, and it will not be installed It is
Of course, if you put the Bar end mirror on, the Handlebar Cover will be You will not be able to install it I used a functional Handlebar Cover in the winter, Parenthesis bad, and In the winter, I was torn between going back to the OEM Mirror or buying electric heat Gloves It is
In fact, I was quite worried until I bought it After all, there is a desire to say if it is a little cheaper You don't need an adapter, but if you have to buy one for other cars, it's not so bad priceView Detail
Most Viewed Reviews Of DAYTONA Bar-End Mirror
Excellent
Best Bar End Mirrors You Can Buy For Your Rebel 1100Still, nowadays, there aren't many after-market parts for Rebel 1100 in the US.Stock mirrors are horrible, Can't see anything behind you with your stock mirrors. So, I have looked everywhere from eBay to Amazon, and found nothing that looks good. Also, it was hard to find all the parts that were required to install the mirrors if you found the mirrors. But, when I visited the webike website it was super easy, everything was so easy to find and super nice quality!!Love these DAYTONA bar end mirrors on my Rebel 1100. View Detail
Excellent
Excellent QualityAbout quality and texture: Very high quality machining and finish, glass is very clear.Products to buy together: Daytona bar endsDifficulty of installation: Sent to workshopto remove OEM Honda bar ends and core. Cost performance and comparison with other products: Preimum but value for money.View Detail
Very Good
喜欢这样的端子镜我非常喜欢这个款式,它是喷砂处理的漆面黑色的外观,能很好的起到防锈蚀的功效,端子镜的杆子是镂空的设计,可以起到轻量化的作用,有一些不足的是它的固定螺丝强度不高,因为我在上紧的时候把它拧断在里面了,后来经过一定处理才把它搞出来,建议生产商可以把螺栓做的更坚固一些。View Detail
Excellent
It is solidly builtIt is a good price, but it has a solid texture and I think it is well made with good precision.
I am also satisfied with the Style and I like the matte finish.View Detail
Very Good
Might be susceptible to vibration.In the case of the Z900, the mirror surface must be oriented so that it protrudes outward when facing downwards, otherwise it will interfere with the tank fairing, so I install it in the Up position.
In this orientation, the mirror surface is closer to the edge of the handlebar, which I personally feel provides better rearward visibility than OEMMirror.
I used to use a bar end mirror of another HIGHSIDER model (Ferrara?). I used to use a bar end mirror of another HIGHSIDER model (Ferrara?), but I think Ferrara's mirror was more vibration resistant. I think that the FERRARARA mirror was more stable up to higher RPMs in terms of vibration resistance.
On StealthX6, the mirror surface begins to blur at about 4000 rpm.
This may differ depending on whether the material of the mirror body is aluminum or plastic.
That said, the texture doesn't feel cheap or anything.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING