Fits Perfectly

A simple part, but an important one. This fuel tank mounting rubber and bush set fits perfectly and does exactly what it should. Keeps the tank secure with no movement or rattles. The rubber density feels right, not too soft or too hard, and the bush slots in cleanly without any trimming or adjustment needed.It’s one of those small replacements that makes a big difference on older Honda's, especially if the original mounts have hardened or cracked over time. Once fitted, the tank sits solid and the overall feels noticeably better than the old bushes.Great little OEM-style part that restores proper fitment and takes the slop out of the tank mounting.View Detail

its just the support plate, not the bracket like shown in ALL of them pictures, a bit misleading since there isnt any picture of just the plate.though it looks good qality its not what I need.View Detail

Really wanted to attach the old CT sub tank to my new trail and this was the best solution I had found at the time. In practice is really flops around alot on the dirt trails and I have seen too many posts of it snapping off the mount on the bike due to the weight of the sup tank. Needs to mount to more than one location. It will work totally fine if you never take the bike off road.View Detail

Hello you all! Just recieved my minimoto mounting rubbers and bushings. First of all the quality is good for the money they cost. Though i dont know how they will last in the long run. Hope the rubber doesn't harden with time. They mount up very good. The rubber feels like it is high quality. I like that you get the whole setup for the cheap price they cost. It certaintly meet up with my demands.View Detail

Product was packaged well. Fast postage. Rubber seemed ok, nice and soft. Problem was tank rubbers. The inside tank mounting hole measured 10mm. My Z50J1 1976 frame measured 5mm, so these rubbers were too big for my frame. I have now had to order 2 new tank mounting rubbers obtaining the correct Honda part.View Detail

This 10-inch aluminum wheel is a great upgrade for Dax and Chaly builds using the 3-spoke hub setup. The machining is smooth and consistent, and the overall finish looks sharp straight out of the box. Fitment is spot-on with the 3-spoke hub, no spacing issues or adjustments needed. Once mounted, the wheel runs true and gives the bike a clean, refreshed look. It’s a simple upgrade that makes a noticeable difference in both appearance and ride quality.A solid, well-made wheel that suits restorations, custom builds, or anyone wanting a better-looking alternative to stock.The tubes feel thick and well made, they come with the bolts to bolt the 2 rims togehter but not the rim to hub bolts, you will need to use the stock bolts for this. These do NOT fit the 3 spoke hubs with a single piece steel outter rimView Detail

This MINIMOTO headlight is a great replacement for aging square eye chaly headlights that might have chome peeling or a cracked lens. The lens is crystal clear, and the reflector has a sharp, clean finish that gives a bright and more focused beam compared to worn OEM parts.Fitment is spot-on it sits perfectly in the original housing with no extra gaps or wobble. The overall look stays true to the classic Chaly design, just much fresher and cleaner. It’s one of those small upgrades that really lifts the front end of the bike and improves night visibility at the same time.A reliable, well-made replacement part that restores both function and appearance on any Chaly build.View Detail

This 10cm long swingarm from Tanaka Trading is a strong, well-built option if you’re stretching a Monkey and want better stability. The steel construction feels solid, welds are tidy, and the included stabilizer adds noticeable stiffness compared to normal extended swingarms.Fitment is straightforward, the pivot, shock mounts, and axle alignment all line up as they should. The extra length gives the bike a longer look, without going overboard.If you’re running a higher-cc setup or just want a cleaner, stretched look with better stability and the OEM+ Look, this swingarm is a dependable choice from a brand that’s always consistent.View Detail

This MINIMOTO tail lamp and bracket set is a clean upgrade for any Chaly build. The bracket is nicely made with good rigidity, and the lamp itself has that classic Chaly look without feeling cheap. Wiring is straightforward, and everything lines up with the factory mounting points, so installation is quick with no modification needed.The light output is bright and clear, making it a noticeable improvement over old, faded OEM units. Once fitted, it sits straight and tidy, giving the rear end a much fresher appearance.If you’re restoring a Chaly or building something a bit custom, this set is a reliable, well-fitting replacement that lifts the overall finish of the bike.View Detail

This Z2-style side cover emblem is a great little detail piece for anyone building a Kawasaki-themed mini or restoring a Z2 Mini replica. The moulding is sharp, the lettering is crisp, and the chrome finish looks clean without any rough spots or casting marks.It mounts securely and sits flat on the cover, giving the bike that proper vintage Kawasaki look. It’s a subtle part, but it really helps tie the whole side profile together, if you’re going for that classic Z2 aesthetic on a Z50.View Detail