4.47 CHF
(750 JPY)
3.82~ CHF
(641 JPY)
(15% OFF)
5 (4 Recensioni)
rating breakdown
5 Stars |
|
4 |
4 Stars |
|
0 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Excellent
It looks great, it's easy to use, and it's maru!I bought them to tighten up my Motocrosser rear axle shaft with a Torque wrench.
Because it is made by KTC, it is reliable, and there is not a sweet spot in the making of the exterior even if I look closely. The sense of unity with KTC Tools Set that I own comes out, and it is Large satisfaction.
Quantity in Wrench:It's easy to insert while still having a firm feeling when setting, it doesn't come off unexpectedly during use, and it's not too hard to remove after use, which makes it satisfying to use.
Quantity to Nut:The Set is neither too hard nor too loose and can be torqued down firmly and removed by tightening and loosening.
It was stored indoors in a toolbox, but even now, more than a year later, there is not a single rust.
Reviews For KTC 9.5sq. Presa 6 punti. From Other Webike User
Excellent
This is my favorite tool.I use the KTC Tool set for DIY maintenance. However, there is no size less than 8mm, and in such cases, it has become a usual routine to buy more at Webike. It is convenient because you can order immediately when it is not available, and it arrives at a later date by itself.View Detail
Excellent
Good productCheap Quantity bought over 20 years ago:I was using Set's Socket. But the 8mm, 10mm and 12mm ones I often use were getting a little worn out, so I decided to buy the KTC Socket for something a little better. It is more compact than the one I used to use and it is very comfortable to use and I enjoy working with it.View Detail
Excellent
There is no shortage in amateur maintenanceSince I did not have much opportunity to use the size of 24 mm so far, I only had a Deep socket and I bought it because Deep socket seems to hurt slowly if it is low head Bolt.
I often use KTC because I do not want to cost Cost when purchasing a tool that is not frequently used, but I think that accuracy is good and Cost performance is outstandingView Detail
Most Viewed Reviews Of KTC 3/8 in. Metric Sockets
Very Good
so far as it goesIt is a Socket set of domestic MAJORBrandKTC.
Accuracy and strength are excellent.
If you compare it with the cheap one of Home center, the smallness of the rattle when you fit it to Bolt is totally different.
I've been using it for a long time, and I don't recall any nasties from using it.
In terms of pure strength, I don't know if it's a Motorcycle Shop Level heavy youth product, but if it's a Sun Machine Level product, I think it's a lifetime Level product.
It is neither Large nor Small in size, but it has a moderate depth and is often not troubled even by Nut opponents.
(The Socket, which sells itself as small, is often pushed out of the way by the Bolt that pops out when used against Nut and cannot be finished off.)
The drawback is the weakness of Plating.
It may depend on the storage conditions, but it rusts quite a bit after long-term use.
Other companies' products stored in the same Socket rail (Similar price range) is safe, so it seems to be a relatively weak category among "good tools".
KTC is a general tool Manufacturer, so it is Recommendation for those who want to have all the "tools" from KTC.
Also, if you are too lazy to do a lot of research on tools and just want something that's there at that price, it's a good option for now.
However, for those who also enjoy collecting tools, there are some with similar accuracy and strength and strong plating in a similar price range, so I think you should check them out, including your preferences.View Detail
Very Good
Standard Tools SetI have been using 6.3sq Ratchet set of No Brand for more than 20 years since I started to work on motorcycle, but as I touched Wrench of KTC which I bought more and more, I decided to replace Ratchet set itself. I chose 9.5sq for insert because I use it for car maintenance.
The case made of the gold genus had volume than seeing it in the Net image, but it seems to be able to put other tools if the attached plastic tray is removed, and also to use it for a long time because the hinge and buckle are solid.
The number of teeth and weight of the GEAR, which is often talked about, and the weight of the spinning Torque are not a concern, but I feel that once you get used to it, it is not a problem.
I think the combination of hex and dodecagon is the place where the taste is divided. In addition, the push button of the Union mechanism of the socket retention is flat with the head surface, and it is hard to be caught, but it needs a little force to push it in. I would have preferred the button to stick out a little.View Detail
Very Good
I thought 4 sizes would be enough for now.When installing the clutch cover this time
The Bolt is 8mm and stops at the back of the socket.
I bought it because the Adapter part hit the Cover and I couldn't tighten the Bolt.
And you'll also need it if Bolt is Penetrating and popping up against Nut.View Detail
Very Good
I'll know when I compare them.I don't know if you're using it with KTCSingle Item.
You'll be amazed at the difference in accuracy when compared to an unknown product.
If you can do some maintenance by yourself, you can use Quantity:Keep one set.
I don't think you can lose anything.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING