48.01 CHF
(8,026 JPY)
4 (17 Recensioni)
Average
Bracket is cheapI attached it to 2 st off-road.
I bought this because I did not want a flashy Knuckle guard for cold weather and purpose.
Installation only bite Bracket to Mirror, so it was easy to install, including adjustment.
Windproof effect is better than nothing, but the coldness in midwinter somewhat softens. Dirtscene firmly guards Knuckle. Gap or broken by vibration etc. etc etc. There is not it for now. Surprisingly overall it is sturdy.
However, since Black Bracket is a Black color Steel which is sold cheaply even in Homsen, the side rusted on Suga.
I think that it is okay to use a little more care as the price is reasonable.
Reviews For World Walk Knuckle Guard universale From Other Webike User
Excellent
It's like an OEMKawasaki KSR 110 installed in Thailand MODEL 2013.
Since it was finished by Lime green with OEM paint color at Manufacturer, it became a feeling of fitting as if it was attached from the exterior as if it was an OEM.
Because I can not run expressways with two types of mopeds, the feeling of running on the general road clearly reduced the wind hitting the hand and the effect of Knuckle guard was recognized.
The installation itself was easy.
Clutch side (Clutch is not attached) In attaching, Bracket seemed to be in contact with the Chalk lever, so I moved Mirror Post about 1 mm to Right Side.
Also, as it is, the front extension with the Axel side is not aligned, so the shorter extension Plate is installed.
View Detail
Excellent
Mirror Adapter is required separately for CB 400 SBUntil now I was wearing Zeta 's Armor Handguard Bend and a dedicated Knuckle guard but I decided to remove them, so I bought this new Knuckle guard as a windshield.
Removing the Hand guard The reason for the biggest Large is Harness - Possibility of Damage to Wire etc..
Although it was a concern from the beginning of installation, since Clearance is quite severe and Harness passes through the outside of the Hand guard, if the Hand guard rotates with a fierce fall in case, there is a possibility of tearing Harness sort I thought.
If so, Lever is not damaged beyond damage, so I decided to remove the hand guard. I regret that I liked it.
Also, my reason is that my Sense has changed and resistance to these forms of Knuckle guard has gone away.
<How to install>
According to Title, CB 400 SB can not be installed with this product alone.
Instead of Bolt for tightening the Knuckle guard, separately M10 (Screw Diameter 10mm) The Mirror Adapter of Quantity : 2pc. Set is required.
I wanted to use OEM's blindfold Cap, so M10 → M10 Standard Thread Screw Adapter for height adjustment (1870 made by Takatsu) The was used.
In addition, commercially available M10 Rose Screw sold at Home center etc. is Pitch (Screw mountain interval) Although it fits, because the height of Screw mountain does not fit, it does not enter Mirror hole. be careful.
Mounting is easy, first with Mirror in the hole Material : Remove the plastic Blindfold Cap with Slotted screwdriver.
Place a Knuckle guard there, tighten the Mirror Adapter with a 14 mm Wrench, etc. and reinstall the blindfold Cap to complete it.
By the way, because this Knuckle guard is one point stopper, because it rotates and it is displaced during tightening, it is good to tighten while pressing with one hand.
CB 400 SB was able to be attached without using the attached extension plate.
When you fully lock the Handlebar, it makes slight contact with the Screen, but it does not matter as it bends a little bit.
Also you can hang Handlebar Lock before touching.
<Usability>
You can realize that it firmly protects the wind to the fingertip.
Of course it is helpless to the wind from the side so it is painful in midwinter alone, but if you combine with Grip heater you can run comfortably as before.View Detail
Very Good
Measures against cold weatherI am using it with XL 1200 C SPORTSTER 1200.
By installing Knuckle guard and Grip heater
Midwinter Riding has also become comfortable.
Especially when running on a highway for a long time, the wind hitting the hands is also
It is considerably reduced.
Since it is slightly outside the width of the Handlebar, attention is required for contact when running in a narrow place.View Detail
Very Good
Until normal installation, one ingenuity, two ingenuity was requiredSR 400 attached to the 35th anniversary MODEL.
The effect is outstanding,
Kit comes with 2Size Bracket,
Since it is one at a time, if one side has Bracket, the other will need Bracket of the same length.
Quantity : Pair (for Left and Right) It becomes a different Length and Balance is bad.
Since Bracket is wide, it corresponds to Master cylinder.
This is avoided with the Mirror Adapter. Since Yamaha's Motorcycle is Opposite Thread Screw, Right-Handed Screw Adapter and Y's Gear's Normal Thread Screw Side Mirror Base are used, and Quantity : Pair (for Left and Right) Both are Normal Thread ScrewMirror.
Since Bracket sold also on Single Item, I ordered it.
So, with the same Length Balance was attached frequently.
But the other problem is.
Since it must be fixed at one point, the Knuckle visor loosens when it is running at high speed.
Loose and hit Lever, it will be very annoying with vibration.
For some reason Left Side only. Right had no problem.
Right may be because the direction the wind hits is the direction the Screw closes.
Left is a loose direction.
So let's chew on Spring washer and add Opposite Thread Screw to Adapter.
That is,
To Right Side, reverse → Right-Handed Screw Adapter + Normal Thread Screw Side Mirror Base (Standard for LeftSide Mirror Base)
Left Side is a positive → Opposite Thread Screw Adapter + Opposite Thread Screw Side Mirror Base (Standard's Right SideSide Mirror Base)
I will carry out a confusing installation called.
As a result, 100 km on the expressway / H It did not become loose even when cruising. When.
Quoted from your blog
https : / / kanjitalker. wordpress. com / 2015 / 04 / 22 / %e3%83%8a%e3%83%83%e3%82%af%e3%83%ab%e3%83%90%e3%82%a4%e3%82%b6%e3%83%bc%e3%82%92%e7%9d%80%e3%81%91%e3%81%9f /View Detail
Very Good
As looking, appearance was also good and was not cold on the high-speed Touring of midwinter at combined use with a Grip heater, either.However, the left falls a little in a relation with the angle of a Mirror, and since it is feeling, they are four starAs looking, appearance was also good and was not cold on the high-speed Touring of midwinter at combined use with a Grip heater, either.However, the left falls a little in a relation with the angle of a Mirror, and since it is feeling, they are four stars.View Detail
Most Viewed Reviews Of World Walk Hand / Knuckle Guards
Excellent
It's like an OEMKawasaki KSR 110 installed in Thailand MODEL 2013.
Since it was finished by Lime green with OEM paint color at Manufacturer, it became a feeling of fitting as if it was attached from the exterior as if it was an OEM.
Because I can not run expressways with two types of mopeds, the feeling of running on the general road clearly reduced the wind hitting the hand and the effect of Knuckle guard was recognized.
The installation itself was easy.
Clutch side (Clutch is not attached) In attaching, Bracket seemed to be in contact with the Chalk lever, so I moved Mirror Post about 1 mm to Right Side.
Also, as it is, the front extension with the Axel side is not aligned, so the shorter extension Plate is installed.
View Detail
Excellent
Mirror Adapter is required separately for CB 400 SBUntil now I was wearing Zeta 's Armor Handguard Bend and a dedicated Knuckle guard but I decided to remove them, so I bought this new Knuckle guard as a windshield.
Removing the Hand guard The reason for the biggest Large is Harness - Possibility of Damage to Wire etc..
Although it was a concern from the beginning of installation, since Clearance is quite severe and Harness passes through the outside of the Hand guard, if the Hand guard rotates with a fierce fall in case, there is a possibility of tearing Harness sort I thought.
If so, Lever is not damaged beyond damage, so I decided to remove the hand guard. I regret that I liked it.
Also, my reason is that my Sense has changed and resistance to these forms of Knuckle guard has gone away.
<How to install>
According to Title, CB 400 SB can not be installed with this product alone.
Instead of Bolt for tightening the Knuckle guard, separately M10 (Screw Diameter 10mm) The Mirror Adapter of Quantity : 2pc. Set is required.
I wanted to use OEM's blindfold Cap, so M10 → M10 Standard Thread Screw Adapter for height adjustment (1870 made by Takatsu) The was used.
In addition, commercially available M10 Rose Screw sold at Home center etc. is Pitch (Screw mountain interval) Although it fits, because the height of Screw mountain does not fit, it does not enter Mirror hole. be careful.
Mounting is easy, first with Mirror in the hole Material : Remove the plastic Blindfold Cap with Slotted screwdriver.
Place a Knuckle guard there, tighten the Mirror Adapter with a 14 mm Wrench, etc. and reinstall the blindfold Cap to complete it.
By the way, because this Knuckle guard is one point stopper, because it rotates and it is displaced during tightening, it is good to tighten while pressing with one hand.
CB 400 SB was able to be attached without using the attached extension plate.
When you fully lock the Handlebar, it makes slight contact with the Screen, but it does not matter as it bends a little bit.
Also you can hang Handlebar Lock before touching.
<Usability>
You can realize that it firmly protects the wind to the fingertip.
Of course it is helpless to the wind from the side so it is painful in midwinter alone, but if you combine with Grip heater you can run comfortably as before.View Detail
Very Good
Measures against cold weatherI am using it with XL 1200 C SPORTSTER 1200.
By installing Knuckle guard and Grip heater
Midwinter Riding has also become comfortable.
Especially when running on a highway for a long time, the wind hitting the hands is also
It is considerably reduced.
Since it is slightly outside the width of the Handlebar, attention is required for contact when running in a narrow place.View Detail
Very Good
Until normal installation, one ingenuity, two ingenuity was requiredSR 400 attached to the 35th anniversary MODEL.
The effect is outstanding,
Kit comes with 2Size Bracket,
Since it is one at a time, if one side has Bracket, the other will need Bracket of the same length.
Quantity : Pair (for Left and Right) It becomes a different Length and Balance is bad.
Since Bracket is wide, it corresponds to Master cylinder.
This is avoided with the Mirror Adapter. Since Yamaha's Motorcycle is Opposite Thread Screw, Right-Handed Screw Adapter and Y's Gear's Normal Thread Screw Side Mirror Base are used, and Quantity : Pair (for Left and Right) Both are Normal Thread ScrewMirror.
Since Bracket sold also on Single Item, I ordered it.
So, with the same Length Balance was attached frequently.
But the other problem is.
Since it must be fixed at one point, the Knuckle visor loosens when it is running at high speed.
Loose and hit Lever, it will be very annoying with vibration.
For some reason Left Side only. Right had no problem.
Right may be because the direction the wind hits is the direction the Screw closes.
Left is a loose direction.
So let's chew on Spring washer and add Opposite Thread Screw to Adapter.
That is,
To Right Side, reverse → Right-Handed Screw Adapter + Normal Thread Screw Side Mirror Base (Standard for LeftSide Mirror Base)
Left Side is a positive → Opposite Thread Screw Adapter + Opposite Thread Screw Side Mirror Base (Standard's Right SideSide Mirror Base)
I will carry out a confusing installation called.
As a result, 100 km on the expressway / H It did not become loose even when cruising. When.
Quoted from your blog
https : / / kanjitalker. wordpress. com / 2015 / 04 / 22 / %e3%83%8a%e3%83%83%e3%82%af%e3%83%ab%e3%83%90%e3%82%a4%e3%82%b6%e3%83%bc%e3%82%92%e7%9d%80%e3%81%91%e3%81%9f /View Detail
Very Good
As looking, appearance was also good and was not cold on the high-speed Touring of midwinter at combined use with a Grip heater, either.However, the left falls a little in a relation with the angle of a Mirror, and since it is feeling, they are four starAs looking, appearance was also good and was not cold on the high-speed Touring of midwinter at combined use with a Grip heater, either.However, the left falls a little in a relation with the angle of a Mirror, and since it is feeling, they are four stars.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING