1.79 CHF
(300 JPY)
1.77 CHF
(296 JPY)
(1% OFF)
5 (4 Recensioni)
rating breakdown
5 Stars |
|
4 |
4 Stars |
|
0 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Excellent
Ripi buyingI purchased because the thing attached from the origin rusted.
The shape is almost the same as OEM. Nevertheless, I could buy it at a price that is close to half.
It is a good item to keep stock.
Reviews For K-CON Dado a clip From Other Webike User
Excellent
For Cowl installation.I bought this for Cowling installation on my CYGNUS X2 model.
I bought this as a spare because the clip nut gaps or falls off when I repeatedly remove and install the cowl.
Since it is only plugged in structurally, there is nothing to hold it in place if the bolt is removed, and the clip nut will be pulled and moved when the cowl is removed.
If it falls out and falls into the inner cowl or into the depths where it is difficult to remove, it may never be removed again, so I always keep a spare of the right size for my motorcycle.
This is an Image that is used a lot, especially on Scooters. Push rivet is often used for single vehicles.
The M5, M4, etc., may differ not only for each car model, but also for each cowl position.
Without the clip nut, the cowl cannot be fixed and may break or fall off due to wind pressure, so it must be installed on all Bolts.View Detail
Excellent
For fixing plastic parts such as cowlGrom's exterior is all Material:This clip nut is used to fix these plastic parts in place There are many There is a hole in the resin body and this clip nut is placed on top of the large body Since the screw thread is cut, the other side of the wood to be fixed to the screw has been cut into the screw thread You put the Screw in and receive it with the Nut over here
After all, the fixation only pinches in, so it shifts frequently The worst thing that could happen is that it comes off and you lose it So I wanted to get a part in advance in case I lost it Then I found out that KITACO provides them They are very conscientiousView Detail
Excellent
I am saved!The hands reach the itchy place, KITACO such a fine product is really appreciated.
You can also order OEM, but by examining the ProductNo section, collecting information with Net, it is troublesome to society.
The commodity itself was similar to OEM, and the installation was not problem at all.
I will continue to support KITACO.View Detail
Most Viewed Reviews Of K-CON Clip Nut
Very Good
Replaces Nut for fixing NumberUsed for fixing Number.
Install the bracket by inserting it between the bracket and the License Plate and adjusting the position while applying the License Plate.
There are a number of security Bolts for fixing Number, but the Bolt that comes with it is often a common one.
Since most Motorcycle numbers are easy to access to Bolt (even if Bolt is for security purpose, it can be removed by turning the nut), we are hoping that the installation of this product will increase the effectiveness of security and prevention of pranks.View Detail
Excellent
For Cowl installation.I bought this for Cowling installation on my CYGNUS X2 model.
I bought this as a spare because the clip nut gaps or falls off when I repeatedly remove and install the cowl.
Since it is only plugged in structurally, there is nothing to hold it in place if the bolt is removed, and the clip nut will be pulled and moved when the cowl is removed.
If it falls out and falls into the inner cowl or into the depths where it is difficult to remove, it may never be removed again, so I always keep a spare of the right size for my motorcycle.
This is an Image that is used a lot, especially on Scooters. Push rivet is often used for single vehicles.
The M5, M4, etc., may differ not only for each car model, but also for each cowl position.
Without the clip nut, the cowl cannot be fixed and may break or fall off due to wind pressure, so it must be installed on all Bolts.View Detail
Excellent
For fixing plastic parts such as cowlGrom's exterior is all Material:This clip nut is used to fix these plastic parts in place There are many There is a hole in the resin body and this clip nut is placed on top of the large body Since the screw thread is cut, the other side of the wood to be fixed to the screw has been cut into the screw thread You put the Screw in and receive it with the Nut over here
After all, the fixation only pinches in, so it shifts frequently The worst thing that could happen is that it comes off and you lose it So I wanted to get a part in advance in case I lost it Then I found out that KITACO provides them They are very conscientiousView Detail
Excellent
Is goodKITACO and ConvenienceParts, which offers a wide range of unlikely items, are Large Helpful
Again, I was able to fix the unavailable NutView Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING