In disk-izing RIYA of the ape 100, this swing arm was purchased.
The reason for having chosen the product made from G craft is beautiful [ structure ].
Since attachment is only changed with a pure swing arm, it is easy.
Since the thing of exclu

About quality and texture - The swingarm (triple square without sway bar) from G-Craft is made from aluminum box section TIG welded together to machined billet aluminum with a highly polished surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The look of the swingarm is most impressive but it doesn't stop there, the bearings fitted to the pivots help to improve the performance of the suspension, while the chain adjusters allow for a simple yet precise tensioning of the chain and alignment of the rear wheel.Products to buy together - A key product to purchase to complement the polished finish of the swingarm is a better styled and finished chain guard then the original Honda part and G-Craft has a restyled polished aluminum one that is a winner in my book. Difficulty of installation - The installation of the swingarm is a intermediate task that took 3 hours to complete. Mechanical aptitude and the use of basic hand tools is required to secure the swingarm to the frame via the swingarm pivot bolt and rear shock bolts.Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the swingarm is no different.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the swingarm, I chose sea freight for the cost saving. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The swingarm (triple square without stabilizer) from G-Craft is made from aluminum box section TIG welded together and to machined billet aluminum with a highly polished surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The look of the swingarm is most impressive but it doesn't stop there, the bearings fitted to the pivots help to improve the performance of the suspension, while the chain adjusters allow for a simple yet precise tensioning of the chain and alignment of the rear wheel.Products to buy together - A key product to purchase to complement the polished finish of the swingarm is a better styled and finished rear hugger then the original Honda part and Tyga Performance has a restyled carbon hugger that is a winner in my book. Difficulty of installation - The installation of the swingarm is a intermediate task that took 3 hours to complete. Mechanical aptitude and the use of basic hand tools is required to secure the swingarm to the frame vua the swingarm pivot bolt and rear shock bolts, access and reinstalling the other parts removed takes time.Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the swingarm is no different.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the swingarm, I chose sea freight for the cost saving. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

As usual g craft buffing finish is very shiny but you must protect it when installing to avoid to do any mark on the alloy.You need to buy the gc 019 MNK frame to fit that swingarmthere is no difficulty to fit on the gcraft GC 019 frameI bought taht swingarm to fit it on the g-craft gc 019 mnk frame. it's a +16cm log swingarm with wide hub and eccentric system. I really love the result. As usual i love gcraft quality parts and i'm really happy of it. Many thanks to webike japan for the support.View Detail

I have always trusted the G Craft Name & products. Howerver this time I am disappointed with this swing arm. Usualy G Craft products have a very nice finish , luster to their polished aluminum. My swing arm.s welds have white dulled texture that telegraphs onto the polished section of the aluminum. I suspect that there was no polishing done after doing the welds. Where it has been polished the surface is scratched in circular motion. For sure if I was doing the Q.A. and this passed in front of me it would be a reject. It takes away the look of what is suposed to be eye candy on my bike. This one is not eye candy...View Detail

About quality and texture, I can confirm the quality great and the material used is aluminum that uses some CNC machined portions and finished with a polished mirror surface.About the feeling of use, One of the highest quality swing arms available for the Grom. Not only does this swing arm look superb when compared to the original Honda part but it also operates flawlessly, with it's improved operation at the pivot due to the addition of bearings and ability to adjust the chain tension with it's improved design, these were the main reasons for purchasing.Products to buy together, To further improve the operation in this area, YSS have also have some beautiful suspension options for the rear shock absorber that are a must to also add to your cart.Difficulty of installation, I can say the fitment of the swing arm for my installation was average due to the number of parts that are required to be transferred over during the replacement and removal of the swingarm pivot bolt which ended up taking sometime to complete.Cost performance and comparison with other products, The pricing of this product is good, you receive a very high quality part that also works extremely well, there are other cheaper priced options available but not with the specific parts that make this upgrade worth it.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail

?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail

I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail

Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail

[How is it used?
Used to lick Screw loose.

Was the one you received as per Image?
As per Image.

How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.

It is also useful for DIY Screw removal.

[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail